OLDER INFORMATION

Haltech Installation Guide
If you are getting a bit stuck with your installation of the Haltech systems, or you are interested in seeing what it takes to install them, then this section will be a good read for you. It basically covers the installation onto a 13B Turbo rotary engine but the basic principle is the same for all motor makes and types.

Click HERE to see how to install a Haltech System

Haltech Ignition Setup Guide
For some people the concepts of intricate ignition systems are a little too difficult to grasp and would rather leave the job to somebody who knows what they are doing. If you are looking for more information about what all the setup areas of your Haltech do so that you can learn to do it yourself, then this would be a good read for you.

Click HERE to find out more about the Haltech Ignition Setup Page
 

Haltech E6K/E6S ECU Wiring Info
If you are looking for the Pin-Out wiring information for the Haltech E6K or E6S systems then this link is for you.

Click HERE for the Wiring Info
 

Old DOS Software Patch Update
A patch update file has been released to fix the problem of a runtime error on some fast 200MHz+ machines trying to run the programming software.

  Download :  TPPATCH.ZIP   9k

Extract the file to your Haltech directory where the programming software   .EXE  file is located. After extraction you must go to the DOS prompt then go to the same directory as the .EXE file and type in :
TPPATCH FILE.EXE
Where FILE.EXE is the name of your Haltech software. For instance , is you have E6K software and the file is called  E6K.EXE  , then you would type in TPPATCH E6K.EXE and the patch will run itself which takes a few seconds. If you have any difficulty then do not hesitate to email or ICQ me about it.